At the very beginning of the production process we need to make a polymer solution which we get from melting the polymer chips. Then this solution is poured into a big chemical vessel. There is a spinneret which is adjoined at the bottom of the vessel and the spinneret consists of a lot of small holes of different sizes and shapes. These holes are called spinneret holes. The solution starts falling through the spinneret holes. At this moment the falling filaments are made cold and condensed by the condenser. One spinneret hole serves one filament only. This filament is called mono-filament. Then these mono-filaments are turned into multifilament with the effect of spin finish application. At last the multifilament is reeled. And this is the overall process of basic mechanism of MMF production.

View all posts